Search Google Appliance

CONTROL & AUTOMATION
High Performance Digital Control Systems

513 Digital control and regulation system Logidyn D2 with LogiCAD

Course Objectives
Participants will use a PC with a LogiCAD graphic engineering interface to explore the Logidyn D2 control and regulation system. They will learn system structure, concepts, use, and engineering of the control and regulation system (open-loop and closedloop). Additionally, participants will learn about commissioning and maintenance of control and regulation structures based on Logidyn D systems. Finally, they will gain an understanding of the configuration and operation of an engineering network system (ENS) and a communication manager (CM) as well as how to connect Logidyn D2
systems to CC100 and RTDB.
 
Learning Outcomes
Use of LogiCAD graphic engineering system to implement and maintain solutions to complex control and regulation problems with a Logidyn D system
 
Prerequisites
Basic knowledge of analog and digital control systems for automation projects in the field of industrial plants Use of a PC
 
Participants
Project engineers, operation personnel, commissioning and maintenance personnel
 
Duration
5 days
 
Location
Berlin
 
 
 
 

517 Digital control and regulation system Logidyn D2 with LogiCAD: maintenance

Course Objectives
Participants will use a PC with a LogiCAD graphic engineering interface to explore the Logidyn D2 control and regulation system. They will learn system structure, concepts, use, and engineering of the control and regulation system (open-loop and closed-loop). Additionally, participants will learn about commissioning and maintenance of control and regulation structures based on Logidyn D systems. They also will gain an understanding of the configuration and operation of an engineering network system (ENS) and a communication manager (CM) as well as how to connect Logidyn D2 systems to CC100 and RTDB. Finally, participants will learn how to perform checks, planned maintenance (such as signal parametrization), and backups and version control as well as how to change an ENS and perform maintenance in the event of errors.
 
Learning Outcomes
Use of LogiCAD graphic engineering system to implement and maintain solutions to complex control and regulation problems with a Logidyn D system.
 
Prerequisites
Basic knowledge of analog and digital control systems for automation projects in the field of industrial plants Use of a PC
 
Participants
Project engineers, operation personnel, commissioning and maintenance personnel
 
Duration
3 days
 
Location
Berlin
 
 
 

560 Digital control and regulation system HPCi with P80i

Course Objectives
Participants will use a PC with a P80i graphic engineering interface to explore the HPCi control and regulation system. They will learn system structure, concepts, use, and engineering of the control and regulation system (open-loop and closed-loop). Additionally, participants will learn about commissioning and maintenance of control and regulation structures based on HPCi systems (VME and PCI), do applications, and perform backup and version control. They also will gain an understanding of the configuration and operation of an engineering network system (ENS) as well as how to connect HPCi systems to CC100 and EtherCAT.
 
Learning Outcomes
Use of graphic engineering system P80i to implement and maintain solutions to complex control and regulation problems with HPCi configuration.
 
Prerequisites
Basic knowledge of analog and digital control systems for automation projects in the field of industrial plants Use of a PC
 
Participants
Project engineers, operation personnel, commissioning and maintenance personnel
 
Duration
5 days
 
Location
Berlin
 
 
 

564 Digital control and regulation system HPCi with P80i - maintenance

Course Objectives
Participants will use a PC with a P80i graphic engineering interface to explore the HPCi control and regulation system. They will learn system structure, concepts, use, and engineering of the control and regulation system (open-loop and closed-loop). Additionally, participants will learn about commissioning and maintenance of control and regulation structures based on HPCi systems (VME and PCI), do applications, and perform backup and version control.
 
Learning Outcomes
Use of graphic engineering system P80i to implement and maintain solutions to complex control and regulation problems with HPCi configuration.
 
Prerequisites
Basic knowledge of analog and digital control systems for automation projects in the field of industrial plants Use of a PC
 
Participants
Project engineers, operation personnel, commissioning and maintenance personnel
 
Duration
3 days
 
Location
Berlin
 
 
 

570 Drive Control Command PECe DC for direct current motors

Course Objectives
After some theoretical reminders concerning DC motor, thyristor bridges, and DC motor control principles, the PECe DC control will be presented. Participants will learn about the application structure, test modes, and Perturbography. They will be able to applicate PECe DC. This training consists 50% practical exercises in which the configuration and use of commands, as well as the use of P80i can be trained. Therefore two PECe DC mock-ups will be used.
 
Learning Outcomes
  • Understand the variable speed principles applied to the DC motor control
  • Know the PECe control system for DC application using P80i 
  • Know and use the PECe dialog tools
 
Prerequisites
P80i knowledge is recommended
 
Participants
Engineers/technicians from maintenance, commissioning or engineering departments
 
Duration
5 days
 
Location
Villebon-sur-Yvette
 
 
 

572 Automation Products 80/HPCi Level 1

Course Objectives
Participants will get to know the P80i/HPCi program. They will learn how to develop and edit P80i, so they are able to install and commission the P80i/HPCi. This training consists 70% practical exercises in which programming will be a topic. Graphic tools and the use of schematics, as well as functional checking, are also a part of the practical exercises. Therefore one HPCi-VME controller, two APC 620 controller and one Rxi controller will be used.
 
Learning Outcomes
Know and program the P80i/HPCi
 
Prerequisites
No specifications
 
Participants
Engineers and technicians from automation department
 
Duration
5 days
 
Location
Villebon-sur-Yvette
 
 
 

573 Automation Products 80 HPCi-RXi

Course Objectives
Participants will get to know the HPCi-RXi program. They will learn how to develop and edit P80i, so they are able to install and commission the HPCi-RXi. This training consists 70% practical exercises in which programming will be a topic. Graphic tools and the use of schematics, as well as functional checking, are also a part of the practical exercises. Therefore one Rxi controller will be used.
 
Learning Outcomes
Know and program the P80i/HPCi-RXi
 
Prerequisites
No specifications
 
Participants
Engineers and technicians from automation
 
Duration
5 days
 
Location
Villebon-sur-Yvette
 
 
 

574 Automation Products 80/HPCi RBC

Course Objectives

Participants will get to know the HPCi Hardware. They will learn how to edit P80i and to commission the HPCi. Maintenance tools will be also part of the training. This training consists 50% practical exercises in which programming will be a topic. Graphic tools and the use of schematics, as well as functional checking, are parts  of theses exercises. Therefore one HPCi controller and PCs under Windows will be needed.
 
Learning Outcomes
P80i/ HPCi initiation
 
Prerequisites
No specifications
 
Participants
Engineers/technicians from automation departments
 
Duration
1 day
 
Location
On customer site (Villebon-sur-Yvette)
 
 
 

575 WAGO Network on Automation

Course Objectives
Participants will get to know the characteristics, topology, connecting, hardware and visualization of the network. The will learn how to commission the network and practice on it. This training consists 70% practical exercises in which programming and commissioning of network WAGO will be trained. Therefore one HPCi controller and one network WAGO 750 +I/O will be used.
 
Learning Outcomes

Know and program the P80i/HPCi

 
Prerequisites
No specifications
 
Participants
Engineers and technicians from automation departments
 
Duration
1 day
 
Location
Villebon-sur-Yvette
 
 
 

576 Ethercat Network on Automation 

Course Objectives
Participants will get to know the characteristics and the configuration of the network. They will learn how to commission it. This training consists 70% practical exercises in which programming will be a topic, as well as installing and using the Ethercat communication network between 1 HPCi and remote I/Os Beckhoff. Therefore one HPCi controller and remote I/Os Beckhoff will be used.
 
Learning Outcomes
Know and program the P80i/HPCi
 
Prerequisites
No specifications
 
Participants
Engineers and technicians from automation departments
 
Duration
1 day
 
Location
Villebon-sur-Yvette
 
 
 

577 HPCi & Supervision Communication

Course Objectives
Participants will get to know the HMI. They will learn how to install it, configure and use it. This training consists 60% practical exercises in which installation, programming, and test of an application will be trained. Therefore six workstations each equipped with an HMI pack will be used.
 
Learning Outcomes
Know the HMI functionalities
 
Prerequisites
No specifications
 
Participants
Engineers and technicians from automation departments
 
Duration
5 days
 
Location
Villebon-sur-Yvette
 
 
 

650 Engineering with P80-HMI

Course Objectives
Interactive training with hands-on exercises. At the end of the course, participants will be able to:
 
  • Understand the structure of P80-HMI
  • Install and configure P80-HMI
  • Develop objects, graphics and macros
  • Use and animate widgets and graphical objects
  • Set relevant parameters
  • Design trends
  • Configure alarm variables
 
Learning Outcomes
Designing plant pictures and programs by using P80-HMI editors
 
Prerequisites
Basic knowledge related to using a PC with a graphical surface and basic knowledge in PLS programming
 
Participants
Commissioning and service personnel, project engineers, customer personnel
 
Duration
5 days
 
Location
Berlin
 
Download Factsheet: Engineering with P80-HMI
 
 
 
Contact
Villebon-sur-Yvette: formation.villebon@ge.com